نوع مقاله : مقاله پژوهشی
نویسندگان
1 عضو هییت علمی دانشگاه آزاد اسلامی واخد تهران جنوب
2 دانشگاه آزاد اسلامی واحد تهران جنوب
3 دانشگاه آزاد اسلامی واحد علوم تحقیقات
4 دانشیار مهندسی صنایع علوم تحقیقات
5 گروه مهندسی صنایع دانشگاه آزاد اسلامی واحد علوم تحقیقات تهران، ایران
چکیده
کلیدواژه‌ها
موضوعات
عنوان مقاله [English]
نویسندگان [English]
One of the issues that cause problems for industries today, especially in the field of sales, is the cost of repairing equipment breakdowns and, as a result, out of service. Specific to that organization, therefore, it should be done by the managers and researchers of that group. Conducting the research "Designing a dynamic intelligent model of preventive maintenance and repairs using the methodology of artificial nervous system - fuzzy logic and in interaction with the production" of the documents of textile and clothing industries in Borujerd, where the project is implemented and on a sample of 2000 of them, the simulation is Vansim's help and then using the artificial intelligence environment of MATLAB software can be claimed. that if (If); situation "Technology factor in Net" should be good, that is 0.9129; and the situation"employees in the net" is good (the upper limit of the membership function is good), that is, 0.9239; And the status of "working environment factor on the net" is relatively good, that is, exactly 0.8859; And the status of should be completel
کلیدواژه‌ها [English]
Alsyouf, I. 2009. Maintenance practices in Swedish industries: Survey results. International Journal of Production Economics, 121 (1), 212-223. doi: https://dx.doi.org/10.1016/j.ijpe.2009.05.005
Arnetz, J. E., Zhdanova, L., & Arnetz, B. B. (2016). Patient involvement: a new source of stress in health care work? Health communication, 31(12), 1566-1572.
Bangalore, P., & Tjernberg, L. B. 2015. An artificial neural network approach for early fault detection of gearbox bearings. IEEE Transactions on Smart Grid, 6 (2), 980-987.
Bell, M. A. 2015. Methods for enhancing system dynamics modeling: state-space models, data-driven structural validation & discrete event simulation. (PhD), Lancaster University.
Brailsford, S., Desai, S. M., & Viana, J. 2010. Towards the holygrail: Combining System dynamics and discrete-event simulation in healthcare. Paper presented at the Proceedings of the Winter Simulation Conference
Droguett, E. L., Jacinto, C. M. C., Garcia, P. A. A., & Moura, M. 2006. Availability assessment of onshore oil fields. Paper presented at the Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 – Safety and Reliability for Managing Risk.
Eti, M.C. & Ogaji, Stephen & Probert, S.D.. (2006). Reducing the cost of preventive maintenance (PM) through adopting a proactive reliability-focused culture. Applied Energy. 83. 1235-1248.
Garcia, Kyounghyun, Minh Chau Nguyen, and Heesun Won. 2015. "Web-based collaborative big data analytics on big data as a service platform." 17th International Conference on Advanced Communication Technology
Kauppi, K, Longoni, A. 2016. Managing country disruption risks and improving operational performance: risk management along integrated supply chains, International Journal of Int.J. Production Economics, vol. 182, PP.484-495.
Kováč, J., Stejskal, T., & Valenčík, Š. (2013). Virtual Reality in the Maintenance of Machinery and Equipment. Applied Mechanics and Materials, 282, 269–273.
Laks, Paul & Wim J. C. Verhagen. 2018. Identification of optimal preventive maintenance decisions for composite components. Transportation Research Procedia, Volume 29, 2018, Pages 202-212
Liyanage, J. and Kumar, U. (2003), "Towards a value‐based view on operations and maintenance performance management", Journal of Quality in Maintenance Engineering, Vol. 9 No. 4, pp. 333-350.
Sgarbossa, Fabio, 2018. Impacts of Weibull parameters estimation on preventive maintenance cost. IFAC-PapersOnLine, Volume 51, Issue 11, 2018, Pages 508-513
Song, Jian, et al. 2018. Dynamic Simulation of the Group Behavior under Fire Accidents Based on System Dynamics. Procedia Engineering, Volume 211, 2018, Pages 635-643
Trejo, d. and Reinschmidt, k. \Justifying materials selection for reinforced concrete structures: Part I – Sensitivity analysis", Journal of Bridge Engineering, 12(1), pp. 31-37 (2005).
Wan, Shan & Li, Dongbo & Gao, James & Roy, Rajkumar & He, Fei. (2018). A collaborative machine tool maintenance planning system based on content management technologies. The International Journal of Advanced Manufacturing Technology. 94. 1639-1653. 10.1007/s00170-016-9829-0.
Woodhouse P., & Tjernberg, L. B. 2015. An artificial neural network approach for early fault detection of gearbox bearings. IEEE Transactions on Smart Grid, 6 (2), 980-987.
Xue, Chaogai &Yawen Xu. 2017. Influence Factor Analysis of Enterprise IT Innovation Capacity Based on System Dynamics. Procedia Engineering, Volume 174, 2017, Pages 232-239
)
ارسال نظر در مورد این مقاله